Cisco C6800-32P10G

Catalyst 6800 32-port 10GE with dual integrated dual DFC4, Spare
Out of stock
SKU
C6800-32P10G=
£22,286.26 £18,571.88
The Cisco Catalyst® 6800 Family Switches offer a variety of 10-Gigabit Ethernet modules. Working in conjunction with the Catalyst® 6500-E/6807-XL Supervisor Engine 2T/2TXL (VS-S2T-10G & VS-S2T-10GXL), they can serve different needs on campus deployments. The family includes three modules: the Catalyst 6800 32-port, 16-port, and 8-port 10-Gigabit Ethernet Fiber Modules.

The modules support hardware-based multicast replication, quality of service (QoS), access control lists (ACLs), jumbo frames, and low latency to enable secure and predictable performance for bandwidth-intensive applications. All three share a common ASIC architecture and support the same set of features in hardware. They support Small Form-Factor Pluggable (SFP/SFP+), 10/100/1000M GLC-T (1G copper SFP) transceivers, and 100M FX. The modules are designed to meet the increasing demand for aggregation of 10-Gigabit Ethernet streams in campus deployments, as well as for high-density 10-Gigabit Ethernet transport in the core.

The modules consist of port groups of eight ports each. The 32-port and 16-port modules can operate in either of two modes: 1) oversubscribed mode (default), which provides for maximum port density, using all of the ports with 2:1 oversubscription; and 2) performance mode, which uses half of the ports, enabling line rates and double the port buffer size. The mode of operation can be changed for each eight-port port-group (mixed mode), and is described in more detail in the following sections. The eight-port 10-Gigabit Ethernet Module always operates in performance mode.

The modules are based on the WS-X6904-40G module and provide the same level of advanced enterprise features and large table sizes that have proven essential to successful operation as a campus aggregation or core switch. They include hardware features such as Virtual Switching System (VSS), Instant Access (IA), Location ID Separation Protocol (LISP), Security Group Tagging (SGT) and Access Control (SGACL), MACsec (802.1ae), traffic shaping, and hierarchical quality of service (HQoS), among others. The line cards are also the first to launch with front-facing passive UHF RFID technology, providing the latest Auto-ID capabilities for asset management.

The C6800 Family 32-port 10-Gigabit Ethernet Fiber Module is suitable for deployment in all campus aggregation and core networks.
- Two models: C6800-32P10G, a 32-port 10-Gigabit Ethernet Fiber Module with DFC4 (see Figure 1), and C6800-32P10G-XL, a 32-port 10-Gigabit Ethernet Fiber Module with DFC4XL
- Backplane connection: 160-Gbps backplane bandwidth in 6807XL; 80 Gbps backplane bandwidth in 6500-E chassis
- Chassis/slot support: Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL. Can occupy any slot in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E
- Supervisor engine: Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL
- Distributed forwarding and performance: Comes equipped with factory-installed dual (2) DFC4-E or DFC4-EXL daughter cards

The C6800 Family 32-port 10-Gigabit Ethernet Fiber module provides up to 160 10-Gigabit Ethernet fiber ports in a single Cisco Catalyst 6807-XL Switch chassis or up to 320 10-Gigabit Ethernet fiber ports in a Cisco Catalyst 6807-XL Virtual Switching System (VSS) 2T. It also provides up to 352 10-Gigabit Ethernet fiber ports in a single Cisco Catalyst 6513-E Switch chassis, or up to 704 10-Gigabit Ethernet fiber ports in a Cisco Catalyst 6500 VSS 2T.
Specification
Manufacturer Cisco
SKU C6800-32P10G=
Manufacturer Part Number C6800-32P10G=
EAN 0882658777707
Condition: New
Detailed Specification
Networking
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3ak, IEEE 802.3an, IEEE 802.3aq, IEEE 802.3x
Jumbo frames supportYes
Ethernet LAN data rates10000 Mbit/s
Quality of Service (QoS) supportYes
Number of VLANs4000
Access Control List (ACL)Yes
Technical details
Bandwidth160 Gbit/s
Operating temperature (T-T)32 - 104 °F
Management platformETHERLIKE-MIB (RFC 1643), IF-MIB (RFC 1573), Bridge MIB (RFC 1493), CISCO-STACK-MIB, CISCO-VTP-MIB, CISCO-CDP-MIB, RMON MIB (RFC 1757), CISCO-PAGP-MIB, CISCO-STP-EXTENSIONS-MIB, CISCO-VLAN-BRIDGE-MIB, CISCO-VLAN-MEMBERSHIP-MIB, ENTITY-MIB (RFC 2037), HC-RMON, RFC1213-MIB (MIB-II), SMON-MIB
MAC address table128000 entries
Ethernet LAN data rates10000 Mbit/s
CompatibilityCisco Catalyst 6800
Buffer size per port2.5 MB
Data transmission
Bandwidth160 Gbit/s
Switching capacity160 Gbit/s
Number of VLANs4000
MAC address table128000 entries
Forwarding rate120 Mpps
Data transfer rate10 Gbit/s
Ports & interfaces
Ethernet LAN (RJ-45) ports32
Performance
CompatibilityCisco Catalyst 6800
Buffer size per port2.5 MB
Ergonomics
Connectivity LEDsYes
Management features
Quality of Service (QoS) supportYes
Management platformETHERLIKE-MIB (RFC 1643), IF-MIB (RFC 1573), Bridge MIB (RFC 1493), CISCO-STACK-MIB, CISCO-VTP-MIB, CISCO-CDP-MIB, RMON MIB (RFC 1757), CISCO-PAGP-MIB, CISCO-STP-EXTENSIONS-MIB, CISCO-VLAN-BRIDGE-MIB, CISCO-VLAN-MEMBERSHIP-MIB, ENTITY-MIB (RFC 2037), HC-RMON, RFC1213-MIB (MIB-II), SMON-MIB
Security
Access Control List (ACL)Yes
Power
Power consumption (typical)587.6 W
Operational conditions
Storage temperature (T-T)-40 - 75 °C
Operating temperature (T-T)32 - 104 °F
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90%
Operating altitude-150 - 3000 m
Weight & dimensions
Weight6.5 kg
Dimensions (WxDxH)391.1 x 416.5 x 43.9 mm
Certificates
SafetyUL 60950-1, CAN/CSA C22.2 No. 60950, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, IEC 60825 Class 1, EN 60825 Class 1, 21CFR 1040
Electromagnetic compatibilityFCC Part 15 (CFR 47) Class A, ICES-003 Class A, VCCI Class A, EN55022 Class A, EN55024, CISPR24, CISPR 22 Class A, AS/NZS CISPR 22 Class A, ETS 300 386, KN 22 Class A, EN 50082-1, EN61000-3-2, EN61000-3-3, EN61000-6-1, CNS13438 Class A, KN6100 -4 Series
Indication
Connectivity LEDsYes

Delivery Details

We use a variety of courier companies to ensure we get your parcels to you in the most efficient and environmentally friendly way possible.  

Once we have prepared your order for despatch, you will receive an email including your tracking number and link to track delivery.

Delivery Rates

Prices include VAT. Orders must be placed and funds cleared by 3:30pm.

Orders placed after 3:00pm, on a weekend or bank holiday will be processed on the next business day. 

Our Carriers require a signature on delivery; please ensure someone will be available to sign. Alternatively they may leave a card with details of how to rearrange delivery or a request for collection from their depot. Any carrier charges for redelivery will be passed on to the purchaser. Refused deliveries will be charged the return delivery fee to our warehouse.

If the package does not appear to be in good condition then please refuse the delivery. If you are unable to check the contents of your delivery at the point of delivery then please sign for the parcel as "UNCHECKED" and report any damage to us with 48 hours. Failure to do so may affect any warranty claims that you make thereafter. 

*Subject to stock location and availability. Customers must hold a pre-approved ‘same day’ registered account. 

   

New

New sealed/unopened box with full manufacturers’ warranty. All accessories and documentation present.

New Bulk

Full manufacturer's warranty. Only essential accessories included. Bulk products are as new but have been re-boxed to cut down on packaging and shipping costs. Ideal when purchasing in quantities, less waste and less time un-boxing.

New Open Box

New and unused product. The product may be missing its original packaging, or the original packaging has been opened or is no longer sealed. Limited 1-year warranty unless specified otherwise. Maybe missing documentation.

New Spares

New parts intended as field replacements. Will not usually come with any documentation or accessories but can be much cheaper than buying new retail products. Recommended when replacing like-for-like.

HPE Renew

Re-manufactured by Hewlett Packard Enterprise. Offer the same reliability and performance, but at least 15% cheaper than buying new. Covered by the full same-as-new HPE warranty starting from the date of purchase – the same warranty offered with new HPE products.

Refurbished

Professionally cleaned, refurbished and soak tested by our certified in house experts. Disk drives are securely erased to US DoD 5220.22-M standards. Firmware is updated to the latest where applicable. We provide a 3 month warranty on refurbished servers and 90 days warranty on all other components.

Used

These products are untested, obscure and require specific equipment to test. Sold as is, but we do offer a 30 day DOA warranty. See the product overview for item specifics.